3,0-3,5 Instrumentation Set

All the instruments composing the 3,0 - 3,5 Instruments Set

-Screwdriver 3,0-3,5 Series Hex Ø 2.5mm ( Minimum req. 1 piece )

Hexagonal Screwdriver: Hex head ø 2.5

- Bushing Extractor 3,0-3,5 Series ( Minimum req. 1 piece )

The VS35 Bushing Carrier / Extractor is a dedicated device used to screw and unscrew the 3,0 -3,5 Series Bushings.

- Depth Meter 3,0-3,5 Series (Minimum req. 1 piece )

Standard depth meters are compatible in holes drilled using FIXIN bits.

- Drill Guide Ø 3,0 mm ( Minimum req. 2 pieces )

This is a dedicated drill guide, it has a tapered cone and fits directly and securely into the bushes. To use in combination with: Drill Bit Ø 2,5

- Drill Guide Ø 3,5 mm ( Minimum req. 2 pieces )

This is a dedicated drill guide, it has a tapered cone and fits directly and securely into the bushes. To use in combination with: Drill Bit Ø 2,9

- Drill Bit Ø 2.5mm (for ø3,0 Screws) ( Minimum req. 1 piece )

Drill Bit Ø 2.5mm for Ø 3.0 Screws; to use in combination with Drill Guide Ø 3,0 mm

- Drill Bit Ø 2.9mm (for ø3,5 Screws) ( Minimum req. 1 piece )

Drill Bit Ø 2.9mm for Ø 3.0 Screws; to use in combination with Drill Guide Ø 3,5 mm

- Screw Case Ø 3,0-3,5 ( Minimum req. 1 piece )

A case for your 3,0 and 3,5 screws.

- T Screwdriver 3,0-3,5 Series Hex Ø 2.5mm ( Optional )

T Screwdriver 3,0-3,5 Series, the T handle of this ø2,5 Hex screwdriver is tought to facilitate the removal of 3,0 - 3,5 Screws